CAT 6A UNSHIELDED PATCH PANEL BLANK TOOL LESS
Blank UTP Tool Less patch panel from Norden exceeds TIA and ISO component specifications, supporting network convergence protocols, delivering maximum bandwidth and extended reliability for all LAN, multimedia, and Power over Ethernet applications. Each port of the panel is numbered and has a designated label area for clear port identification. Keystone outlets can be snapped in to the 10’’ frame without the need for tooling of any type and is supplied in unloaded version. The tool-less jack termination offers fast and reliable installation of unshielded cable, quick and easy in termination. A rear cable management bar is supplied which acts as a stress reliever of terminated cables. The patch panel comes with mini cable ties, cage nuts and rear cable management bar as standard. Enhanced cable retention fixture and unique assembly. Supports solid 22-24 AWG wires and stranded 24-26 AWG
Category 6a F/FTP Patch Cord
Norden Cat6A F/FTP patch cord delivers optimal transmission & Networking performance with reduced Insertion loss and Alien crosstalk. This is fully backward compatible to Category 6(Class E) and Category 5e (Class D) products and maximizes productivity levels 10 times the data throughput of Category 6.Each patch cord is tested with Fluke tester and individual cover include with the report. This Patch cord is tested for transmission frequencies up to 500 MHz and compatible with the 10 Gigabits applications including the following protocols: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-Any LAN 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM Voice.
CATEGORY 6A UTP CROSSOVER PATCH CORD
Norden Category 6A UTP Cross-over patch cord delivers optimal transmission & Networking performance with reduced Insertion loss and Alien crosstalk. This is fully backward compatible to Category 6 (Class E) and Category 5E (Class D) products and maximizes productivity levels 10 times the data throughput of Category 6. Each patch cord is tested with Fluke tester and individual cover include with the report. This Patch cord is tested for transmission frequencies up to 500 MHZ and compatible with the 10 Gigabits applications, including the following protocols: Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-Any LAN100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM Voice
CATEGORY 6 U/UTP EXTERNAL DOUBLE JACKET PATCH CORD – PE WITH ANTI RODENT CHEMICAL
Norden Cat 6 U/UTP External Double Jacket Patch Cord consists of PE insulated 26AWG Stranded Bare Electrolytic Grade Copper Conductors (4 pairs), separated from one another through a cross separator (which improves the Cross Talk). The cable has an inner sheath of PVC followed by an outer jacket of PE with Anti-Rodent Chemical properties. This patch cord when used with high-performance Norden Category 6 connectivity (solid UTP cable, patch panels, and work area outlets), provide superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base-Tx) applications support. Each patch cord is tested with a Fluke tester
CATEGORY 6 S/FTP PATCH CORD
Norden Cat 6 S/FTP patch cords are manufactured using high quality shielded four pair Category 6 stranded cable, and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high performance Norden Category 6 connectivity (Solid shielded cable, patch panels and work area outlets), provide superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base-Tx) applications support. This is fully backward compatible to Category 5e (Class D) products backup. Each patch cord is tested with Fluke tester and individual cover include with the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz.
CATEGORY 6 S/FTP AL-MG BRAID SLIM PATCH CORD
Norden Category 6 S/FTP patch cords are manufactured using high quality shielded four pair Category 6 stranded cable, and feature cable strain relief boots with a plug latch protection cap. It has overall Aluminium Magnesium Alloy wire as a shield which provides EMI protection. This patch cord, when used with high performance Norden Category 6 connectivity (Solid shielded cable, patch panels and work area outlets), provides superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base-Tx) applications support. This is fully backward compatible with Category 5e (Class D) products. Each patch cord is tested with Fluke tester and individual cover included with the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz.
Category 6 F/UTP Patch Cord
Norden Category 6 F/UTP patch cords are manufactured using high quality F/UTP four pair Category 6 stranded cable, and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high performance Norden Category 6 connectivity (solid F/UTP cable, patch panels and work area outlets) , provide superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base-Tx) applications support. This is fully backward compatible to Category 5e (Class D) products_backup. Each patch cord is tested with Fluke tester and individual cover include with the report .Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz.
Category 5E U/UTP Patch Cord
Norden Cat5e patch cords are designed for Electro-magnetic Compatibility, minimizing radiation and maximizing noise immunity. A unique double termination method providing the advantage of both molded and non-molded terminations is implemented in this product. High return loss & NEXT loss values ensure low BER (Bit error Ratio) in all application. This Patch cord is tested for transmission frequencies of up to 100 MHz and high quality plug is designed with integrated strain relief boot.
Category 5e F/utp Patch Cord
Norden Cat5e patch cords are designed for Electro-magnetic Compatibility, minimizing radiation and maximizing noise immunity. A unique double termination method providing the advantage of both moulded and non-moulded terminations is implemented in this product. High return loss & NEXT loss values ensure low BER (Bit error Ratio) in all application. This Patch cord is tested for transmission frequencies of up to 100 MHz and high quality plug is designed with integrated strain relief boot.
CATEGORY 6 U/UTP FLAT PATCH CORD
Norden Category 6 UTP flat patch cords are manufactured using high quality unshielded four pair Category 6 stranded cable ,and feature cable strain relief boots with a plug latch protection cap. This patch cord when used with high performance. Each patch cord is tested with Fluke tester and individual cover include with the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz.
Cat 6 U/UTP Key Lock Patch Cord
Norden Category 6 UTP patch cords are manufactured using high quality unshielded four pair Category 6 stranded cable, and feature cable strain relief boots with a plug latch protection cap. Additionally it’s having Key lock protection to avoid the link connectivity & It’s highly recommendable for datacenter Solution. This patch cord when used with high performance Norden Category 6 connectivity (solid UTP cable, patch panels and work area outlets), provide superior performance capabilities of high bandwidth (Gigabit 1000Base-T and 1000Base-Tx) applications support. This is fully backward compatible to Category 5e (Class D) products_backup. Each patch cord is tested with Fluke tester and individual cover include with the report. Norden Category 6 Patch cord is tested for transmission frequencies of up to 250 MHz.
