NPP-6A2BLKXX1

Norden Cat 6 Shielded Keystone Jack Tool Less 180D are shielded with a two part case giving optimum protection from electromagnetic interference from an outside source. The rear casing is clicked into place after shielded cable has been fed through the centre and terminated to the jack. These Jacks are designed to reduce the Insertion loss & alien cross talk in order to provide maximum flexibility and high performance for all 10G Ethernet applications and are available in a 180° orientation with back interconnection of Dual IDC blocks in universal pin/pair assignment.180° orientation provides perfect termination with minimum distance to the IDC. This is tested to 250 MHz range over 100m and supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief. They can be installed into a number of faceplates and unloaded shuttered modules and backward compatible with category 5e/class D system components.

Norden Category 5E PCB Punch down 6C Module Comply to the industry standard 6C fixing dimension and Compactable with floor boxes, face plates and trunking accessories for 6C Connecters. It has provision for labelling and rear Cable tie point. The modules have a dual style IDC punch down block on the termination side which will allow the installer to terminate with either a 110 or Krone insertion tool and is present with colour coding for both T568A & T568B wiring conventions

Norden Category 6 tool less UTP keystone Jacks give optimum protection from electromagnetic interference from an outside source. The tool-less termination allows all eight conductors to be terminated simultaneously when the termination cap is pressed into place .These Jacks are designed to reduce the Insertion loss & alien cross talk in order to provide maximum flexibility and high performance for all 10G Ethernet applications and are available in a 180° orientation with back interconnection of Dual Style IDC blocks in universal pin/pair assignment.180° orientation provides perfect termination with minimum distance to the IDC. This is tested to 250 MHz range over 100m and supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief. They can be installed into a number of faceplates and unloaded shuttered modules.

Norden HDMI & USB port face plate is perfect for the transition to inwall cabling. The solution offers a clean, professional look and is ideal for classrooms, conference rooms and houses of worship. This UK style face plate includes flexible pigtails that accommodate the tight bend radius required for installations within a standard junction box.