NPP-C61BLK243

Norden Category 5e Euro module features a slim line design with a shutter to prevent dust from entering the module which is an ideal solution for wall plates and fully supports all presently available LAN applications. This type Euro module provides easy top entry termination, with a clip-on design fitting directly into a euro 50 x 25 aperture for easy installation and is supplied with tie wraps & labeling window. The modules have a dual style IDC punch down block on the termination side which will allow the installer to terminate with either a 110 or Krone insertion tool and is present with colour coding for both T568A & T568B wiring conventions.

Norden Category 6 tool less UTP keystone Jacks give optimum protection from electromagnetic interference from an outside source. The tool-less termination allows all eight conductors to be terminated simultaneously when the termination cap is pressed into place .These Jacks are designed to reduce the Insertion loss & alien cross talk in order to provide maximum flexibility and high performance for all 10G Ethernet applications and are available in a 180° orientation with back interconnection of Dual Style IDC blocks in universal pin/pair assignment.180° orientation provides perfect termination with minimum distance to the IDC. This is tested to 250 MHz range over 100m and supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief. They can be installed into a number of faceplates and unloaded shuttered modules.

Norden Hybrid High Density Patch Panel which can accommodate copper & fibre termination in a single panel. Norden Pre-terminated Hybrid patch panels are ideal solutions for data centres and applications where speed of installation is important. Data centre managers can make changes on the fly based on rapid network growth and migration, business decisions, or shifting requirements.1U High Density Blank Panel can accommodate 4 nos. of fibre or copper cassettes with different types of adaptor.

UTP keystone jack with shutter exceed TIA/EIA and ISO component and channel performance, can be used in unloaded patch panels, faceplates and shutters, in a variety of colour options. These Jacks are designed to reduce the Insertion loss & Alien cross talk in order to provide maximum flexibility and high performance and are available in a 180° orientation with a dual termination block which will allow the installer to terminate with either a 110 or Krone insertion tool. This supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief.