CAT 6A UNSHIELDED PATCH PANEL BLANK TOOL LESS
Blank UTP Tool Less patch panel from Norden exceeds TIA and ISO component specifications, supporting network convergence protocols, delivering maximum bandwidth and extended reliability for all LAN, multimedia, and Power over Ethernet applications. Each port of the panel is numbered and has a designated label area for clear port identification. Keystone outlets can be snapped in to the 10’’ frame without the need for tooling of any type and is supplied in unloaded version. The tool-less jack termination offers fast and reliable installation of unshielded cable, quick and easy in termination. A rear cable management bar is supplied which acts as a stress reliever of terminated cables. The patch panel comes with mini cable ties, cage nuts and rear cable management bar as standard. Enhanced cable retention fixture and unique assembly. Supports solid 22-24 AWG wires and stranded 24-26 AWG
CAT6A UTP Tool Less Connector
Category 6A Toolless Connectors exceed Category 6A long lasting high-performance and full support of all present and emerging applications, including 1000BASE-T (Gigabit-Ethernet). High quality overall shield provides excellent EMC (Electro Magnetic Compatibility), minimizing radiation and maximizing noise immunity, ensures long term resistance to corrosion from humidity, extreme temperatures, and airborne contaminants. Tested up to 500 MHz over 100m. These are mainly used for patch cord termination.
Category 5E Euro Module
Norden Category 5e Euro module features a slim line design with a shutter to prevent dust from entering the module which is an ideal solution for wall plates and fully supports all presently available LAN applications. This type Euro module provides easy top entry termination, with a clip-on design fitting directly into a euro 50 x 25 aperture for easy installation and is supplied with tie wraps & labeling window. The modules have a dual style IDC punch down block on the termination side which will allow the installer to terminate with either a 110 or Krone insertion tool and is present with colour coding for both T568A & T568B wiring conventions.
Category 5e F/utp Patch Cord
Norden Cat5e patch cords are designed for Electro-magnetic Compatibility, minimizing radiation and maximizing noise immunity. A unique double termination method providing the advantage of both moulded and non-moulded terminations is implemented in this product. High return loss & NEXT loss values ensure low BER (Bit error Ratio) in all application. This Patch cord is tested for transmission frequencies of up to 100 MHz and high quality plug is designed with integrated strain relief boot.
Category 5E PCB Punch Down 6C Module
Norden Category 5E PCB Punch down 6C Module Comply to the industry standard 6C fixing dimension and Compactable with floor boxes, face plates and trunking accessories for 6C Connecters. It has provision for labelling and rear Cable tie point. The modules have a dual style IDC punch down block on the termination side which will allow the installer to terminate with either a 110 or Krone insertion tool and is present with colour coding for both T568A & T568B wiring conventions
Category 5E PCB Punch Down Right Angled Patch Panel
Category 5E PCB Punch Down Patch Panel from Norden exceeds TIA and ISO component specifications, supporting network convergence protocols, delivering maximum bandwidth and extended reliability for all LAN, multimedia, and Power over Ethernet applications.The Right angled mounted PCB provides easy termination using a Krone or 110 punch down tool and there are colour coded labels for both 568A and 568B wiring configurations. All performance parameters, including NEXT, FEXT Attenuation and Return Loss are designed to meet the Cabling standard. The patch panel comes with mini cable ties, cage nuts and rear cable management bar as standard.
Category 5E RJ45 Connector
Category 5e Connectors exceed Category 5e long lasting high-performance and full support of all present and emerging applications, including 1000BASE-T (Gigabit-Ethernet). The range of products includes plugs suitable for round cables with stranded or solid conductors, 24 to 26 AWG and are tested up to 100 MHz over 100 m. These are mainly used for patch-cord termination
Category 5E U/UTP Patch Cord
Norden Cat5e patch cords are designed for Electro-magnetic Compatibility, minimizing radiation and maximizing noise immunity. A unique double termination method providing the advantage of both molded and non-molded terminations is implemented in this product. High return loss & NEXT loss values ensure low BER (Bit error Ratio) in all application. This Patch cord is tested for transmission frequencies of up to 100 MHz and high quality plug is designed with integrated strain relief boot.
Category 5e U/UTP Patch Cord E-series
Norden Category 5e patch cords are designed for Electro-magnetic Compatibility, minimizing radiation and maximizing noise immunity. High return loss & NEXT loss values ensure low BER (Bit error Ratio) in all application. This Patch cord is tested for transmission frequencies of up to 100 MHz and high quality plug is designed with integrated strain relief boot.
Category 5E Unshielded Patch Panel
High quality Category 5E Patch panels form NORDEN are color coded for both 568A and 568B standards. Dual type Termination block accept both Krone and 110 type punch down tool. Robust and installer friendly design makes reduced installation and operating costs. The pack includes cable manager, mounting screws and cable ties. Modular and expandable comprehensive product range provides up to 48 ports in a single panel.
Category 5E UTP Keystone Jack
Norden Category 5e UTP keystone Jacks exceed category 5e performance with component and channel performance to 100 MHz can be used in unloaded patch panels, faceplates and shutters, in a variety of colour options. These Jacks are designed to reduce the Insertion loss & Alien cross talk in order to provide maximum flexibility and high performance for all 10G Ethernet applications and are available in a 90° orientation with a dual termination block which will allow the installer to terminate with either a 110 or Krone insertion tool (Dual IDC). 90° orientation provides perfect termination This supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief.
