NCB-6AUGRYR1-X

This back box is used for 86x86mm wall mount faceplate.

Norden Category 5e UTP keystone Jacks exceed category 5e performance with component and channel performance to 100 MHz can be used in unloaded patch panels, faceplates and shutters, in a variety of colour options. These Jacks are designed to reduce the Insertion loss & Alien cross talk in order to provide maximum flexibility and high performance for all 10G Ethernet applications and are available in a 90° orientation with a dual termination block which will allow the installer to terminate with either a 110 or Krone insertion tool (Dual IDC). 90° orientation provides perfect termination This supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief.

Norden Category 6 tool less UTP keystone Jacks give optimum protection from electromagnetic interference from an outside source. The tool-less termination allows all eight conductors to be terminated simultaneously when the termination cap is pressed into place .These Jacks are designed to reduce the Insertion loss & alien cross talk in order to provide maximum flexibility and high performance for all 10G Ethernet applications and are available in a 180° orientation with back interconnection of Dual Style IDC blocks in universal pin/pair assignment.180° orientation provides perfect termination with minimum distance to the IDC. This is tested to 250 MHz range over 100m and supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief. They can be installed into a number of faceplates and unloaded shuttered modules.

Norden LJ6C Single Gang Faceplate with Module provides the performance needed for data communications networks and applications, including Gigabit Ethernet, with the added benefit of shielding to minimise the risk of EMI. Norden LJ6C Modules are ideal for use in floor boxes, or any application that has an industry standard LJ6C aperture. Single and dual gang face plates are available for up to four LJ6C modules in addition to panels suitable for Ackerman floor boxes. The modules are fully compliant with the ANSI/TIA Category 6 standards.