NCB-C6UGRYR-305-24
₨ 0
Cat6 UTP 24AWG Cable Rolls
Related products
Cat 6 Shielded Keystone Jack Tool Less 180D
Norden Cat 6 Shielded Keystone Jack Tool Less 180D are shielded with a two part case giving optimum protection from electromagnetic interference from an outside source. The rear casing is clicked into place after shielded cable has been fed through the centre and terminated to the jack. These Jacks are designed to reduce the Insertion loss & alien cross talk in order to provide maximum flexibility and high performance for all 10G Ethernet applications and are available in a 180° orientation with back interconnection of Dual IDC blocks in universal pin/pair assignment.180° orientation provides perfect termination with minimum distance to the IDC. This is tested to 250 MHz range over 100m and supports T568 A&B wiring & easy installation. The jack is manufactured with an integral cable strain relief. They can be installed into a number of faceplates and unloaded shuttered modules and backward compatible with category 5e/class D system components.
Category 5E PCB Punch Down 6C Module
Norden Category 5E PCB Punch down 6C Module Comply to the industry standard 6C fixing dimension and Compactable with floor boxes, face plates and trunking accessories for 6C Connecters. It has provision for labelling and rear Cable tie point. The modules have a dual style IDC punch down block on the termination side which will allow the installer to terminate with either a 110 or Krone insertion tool and is present with colour coding for both T568A & T568B wiring conventions
Category 5E RJ45 Connector
Category 5e Connectors exceed Category 5e long lasting high-performance and full support of all present and emerging applications, including 1000BASE-T (Gigabit-Ethernet). The range of products includes plugs suitable for round cables with stranded or solid conductors, 24 to 26 AWG and are tested up to 100 MHz over 100 m. These are mainly used for patch-cord termination
Category 6 UTP Keystone Jack
Norden Category 6 UTP punch down keystone Jack gives optimum protection from electromagnetic interference from an outside source. These Jacks are designed to reduce the Insertion loss & alien cross talk in order to provide maximum flexibility and high performance for all 10G Ethernet applications and are available in a 90° orientation with back interconnection of Dual Style IDC blocks in universal pin/pair assignment. 90° orientation provides perfect termination .This is tested to 250 MHz range over 100m and supports T568 A&B wiring & easy installation. The Jack is manufactured with an integral cable strain relief. They can be installed into a number of faceplates and unloaded shuttered modules and backward Compatible with category 5e/class D system components.
Category 6 UTP Keystone Jack Punch Down
UTP keystone jack exceed TIA/EIA and ISO component and channel performance, can be used in unloaded patch panels, face plates in a variety of colour options. These Jacks are designed to reduce the Insertion loss & Alien cross talk in order to provide maximum flexibility and high performance and are available in a 180° orientation with a dual termination block which will allow the installer to terminate with either a 110 or Krone insertion tool. This supports T568 A &B wiring & easy installation. The jack is manufactured with an integral cable strain relief.
Face Plate USA Standard
Norden offers a faceplates in USA standard to provide the basis for a wide range of possible information outlet combinations. These are available in blank (modular) forms with USA styles. The module features a designated area for labeling and these are supplied with M3.5 mounting screws.Norden faceplate is the ideal solution for office environments where multiple services need to be supplied at one location.
French Style Face Plate
Norden offers a variety of French style face plates to provide the basis for a wide range of possible information outlet combinations. Outlets are available in single, double and quad ports. These are available with shuttered brackets forms and back box for French style face plates. The module features a designated area for labelling. Norden faceplate is the ideal solution for office environments where multiple services need to be supplied at one location.
Reviews
There are no reviews yet.